ASTM C1289 Standard Specification for Faced Rigid Cellular Polyisocyanurate Thermal Insulation Board
The ASTM C1289 mainly specifies the standards for rigid polyisocyanurate foam boards with the intention of thermal insulation in the enclosures of the building. It specifies the structural performance of untouched boards covered with material characteristics, dimensional tolerance, thermal resistance, and aluminum foil, fiberglass, or coated polymer film. The standard has provisions for the control of quality and characteristics testing, such as compressed power, dimensional stability, and water absorption. These boards are used due to their high R-value per inch in large-scale roofs, wall assemblies, and roofs. The ASTM C1289 provides continuity and dependence of these products between manufacturers and project requirements.
Read More
GET STARTED
ASTM C1289 Introduction
Rigid polyisocyanurate board building is one of the most effective and widely used thermal insulation materials in the building sector. ASTM C1289 plays an important role in controlling the performance and compatibility of various construction systems. This standard classifies products according to their basic foam type and festive combinations, for example, Type V through Type I. It establishes minimal requirements for compressed resistance, thermal resistance (R-value), dimensional tolerance, and moisture resistance. The specification also includes workmanship, sample, and labeling. According to ASTM C1289, manufacturers ensure that their insulation boards maintain consistent performance under real circumstances, allowing builders to obtain energy code and create display goals.
ASTM C1289 Test Method
Compressive Strength
A 2″ x 2″ sample is loaded at a uniform rate until failure; a minimum of 20 psi is required for many types.
Water Absorption
Specimens are submerged in water for 24 hours, then weighed to determine mass gain percentage.
Dimensional Stability
Boards are conditioned at 158°F and 95% RH for 7 days; length and width change must not exceed 2%.
ASTM C1289 Equipment and Sample Preparation
Specimen Dimensions
Test samples are precisely cut to 6″ x 6″ for water absorption and 2″ x 2″ for compressive strength.
Conditioning Chamber
Maintains environmental conditions at ±2°F and ±5% RH to simulate thermal aging or humidity exposure.
Cutting Tools
Fine-tooth band saws or CNC foam cutters are used to avoid crushing or deforming the foam edges.
ASTM C1289 Results and Interpretation
Test data are compared to performance minimums described in the specification. Compressive strength below the prescribed value signifies structural insufficiency under load. Water absorption greater than threshold values indicates susceptibility to moisture entry, potentially compromising thermal performance. Dimensional distortion beyond allowed limits indicates instability that could cause gapping, buckling, or interruption in insulation continuity. Test results assist manufacturers in process control and advise purchasers regarding applicability to high-moisture or load-bearing uses.
Service Name
Remarks
ASTM C1289 Testing
Contact US
ASTM C1289 Related Articles
ASTM C209 stipulates test procedures for numerous insulating products, such as water absorption and linear shrinkage. ASTM C303 provides methods to measure the density of rigid cellular plastics to ensure uniformity in insulation performance. ASTM E96 covers water vapor transmission properties, which are essential when insulation is being employed in environments sensitive to vapor.
Materials Commonly Tested with ASTM C1289
The most tested products under this specification are polyisocyanurate foam boards faced with foil facers, although glass-fiber reinforced facers or coated polymeric facings are also typical. Such facings will affect moisture resistance, fire performance, and adhesion properties at the substrate.
Applications of ASTM C1289 in Industry
C1289-approved insulation boards are commonly applied in commercial and residential buildings, especially in low-slope roofing systems. They are also utilized in exterior walls, ceilings, and as continuous insulation to comply with energy code. Their suitability for single-ply roofing membranes and high thermal resistance makes them a choice in energy-efficient building construction.
Safety and Best Practices in ASTM C1289
The standard mandates gentle handling of foam boards to prevent damage that would influence thermal performance. While testing, laboratories must check that the conditioning chambers are calibrated and that the tested samples are defect-free. It is important to wear personal protective gear during cutting or sanding the foam, because breathing in small particles could be dangerous. The standard explains that open flames should be prevented around polyisocyanurate boards, as they can burn under particular conditions.
Importance of ASTM C1289
ASTM C1289 plays an important role in ensuring the reliability of rigid foam insulation under diverse climate and construction assemblies. This guarantees the durability, stability, and energy efficiency of thermal insulation products, eventually contributing to the overall performance and safety of contemporary buildings. Compliance facilitates energy conservation measures and enables designers to relax high-performance insulation within buildings.
Related
FAQ's
Where can I get the astm c1289 tested?
You can share your astm c1289 testing requirements with MaTestLab. MaTestLab has a vast network of material testing laboratories, spread across the USA and Canada. We support your all material testing needs ranging from specific astm c1289 test to various testing techniques.
How much do I need to pay for the astm c1289 test?
Please contact us for a detailed quote for your astm c1289 testing needs. Cost incurred to carry out different astm c1289 testing methodology depends on the type of raw material; number of samples, coupons, or specimens; test conditions, turn around time etc. Costs of some ASTM testing methods start from $100 and the final value depends upon the factors listed above. Please contact us for the best and latest prices.
How many samples are required for astm c1289?
The required number of samples or specimens should comply with the procedure given in the astm c1289 standard. However, the MaTestLab operations team can assist you for your special requirements once you share your testing details with us.
How much discount can I get on the astm c1289 test?
MaTestLab has a vast testing laboratory network, hence we bring you the best testing facilities in a cost-effective way. We offer considerable discounts (15-20%) to our returning customers based on test volume and frequency.
How many days will it take to complete the astm c1289 test?
The turnaround time for astm c1289 test methodology depends upon the test procedure mentioned in the standard test document. However, we at MaTestLab understand your research requirements and hence try to get your test completed within the least possible time.
Where can I get the astm c1289 tested?
You can share your astm c1289 testing requirements with MaTestLab. MaTestLab has a vast network of material testing laboratories, spread across the USA and Canada. We support your all material testing needs ranging from specific astm c1289 test to various testing techniques.
MaTestLab Inc. offers accessible, quick, and affordable material testing, product testing, and failure analysis services. We support your on-demand testing and expert consultation needs with the help of our extensive network of material testing laboratories situated in the US and other parts of the world.
MATERIAL TESTING
We offer destructive and non-destructive tests over a range of mechanical, electrical, chemical, thermal, optical, corrosion, radiation, and biological testing methodologies defined by ASTM, ISO and other organizations.
PRODUCT TESTING
We help you evaluate and ensure your product quality and performance with standard and custom-made testing solutions. All the tests are done at well-equipped testing laboratories using standard testing methods for best output and satisfaction.
FAILURE ANALYSIS
Failure analysis ensures high levels of quality in every manufacturing process. We help you with getting the best failure or root cause analysis to determine the cause of the failure. The results help you identify means to prevent failure recurrences.
