ASTM C1901 Test Method for Determination of Cement Density
This test method is used for hydrophobic Portland cement density by determining mass per unit volume. The determinations are performed as a test for evaluating cement quality intended for low water absorption applications. Density directly impacts material performance features - strength, durability, and cement stability. Low-density hydrophobic cement tends to be less robust and less durable, while high-density can give more structural integrity.
Read More
GET STARTED
ASTM C1901 Introduction
This standard test method determines the density of hydrophobic Portland cement. Hydrophobic cement is a special formulation that does not absorb water. It is more advisable to be used during wet conditions or environments that are usually wet and moist. MaTestLab provides high-class testing services with a wide network of laboratories throughout the USA and specializes in ASTM C1901testing for our customers. The data obtained with this method is essentially used for quality assurance, performance measurement, reliability verification, and conformity to material specifications.
ASTM C1901 Test Method
Specimen Selection
A representative sample of hydrophobic Portland cement is chosen.
Weighing
The specimen is weighed using a calibrated balance to determine its mass.
Volume Measurement
The volume of the cement sample is measured using a standardized container or apparatus.
Density Calculation
The density is calculated by dividing the specimen’s mass by its volume (mass/volume).
ASTM C1901 Equipment and Sample Preparation
Specimen Details
A representative sample of hydrophobic Portland cement is selected, ensuring it is uniform and free from contaminants.
Specimen Dimensions
The cement sample is prepared in the required form to ensure accurate mass and volume measurements.
Specimen Preparation
The sample is dried to remove any excess moisture before testing. A calibrated balance and container are used for weighing and volume measurements.
ASTM C1901 Results and Interpretation
The results of this test method are presented as hydrophobic Portland cement density, typically expressed as measured in kilograms per cubic meter (kg/m³). High Density Means the cement has a lower porosity and thus is likely to show greater strength as well as durability. Low Density states that the cement is denser, hence leading to weaker structural integrity.
Service Name
Remarks
ASTM Testing
Expert Consultation
ASTM C1901 Related Tests
ASTM C188 is a pertinent test method for measuring the density of hydraulic cement. There is also ASTM C191 for the cement setting time. All together with ASTM C1901, these tests give an overall view of the physical and performance characteristics of hydrophobic Portland cement.
ASTM C1901 Testing in Other Industries
This testing is widely applied in several industries, mainly the construction and infrastructural sectors. Hydrophobic Portland cement has extensive usage in the construction of dams, bridges, and tunnels, as these structures are predominantly wet, which could affect the long-term integrity and stability of the above structures. The widely used material evaluated through this test method is hydrophobic Portland cement. This cement is resistant to the absorption of water and widely applied in projects where it is most likely exposed to moisture that may degrade the traditional cement in similar situations.
Common Issues or Troubleshooting Issues of ASTM C1901 Test
There are times when some common issues arise when performing this test method. For instance, there may be massive effects of residual moisture not eliminated in the measured density of the cement sample before the test is conducted. Proper equilibration of the equipment, particularly balance and volume measuring devices, needs to be carried out carefully so that the data obtained is accurate. To this end, the samples should not be contaminated during handling to prevent altering the test outcome.
Safety and Best Practices ASTM C1901
Test Safety Precautions of this test method are relatively straightforward, but utmost care needs to be exercised to observe safety. Handling the cement specimen requires proper protective gear, including gloves and a mask, to avoid contact with the substance or inhalation of its dust particles. Similarly, when the drying apparatus is used, one should be careful not to get burned or injured.
Significance of ASTM C1901 to Industry
The quality and performance of hydrophobic Portland cement in both construction and industrial applications hinge on the outcome of ASTM C1901. This test allows manufacturers and engineers to study the material’s moisture resistance and ability to hold this structure’s integrity by providing a standardized method of measuring its density.
Related
FAQ's
Where can I get the astm c1901 tested?
You can share your astm c1901 testing requirements with MaTestLab. MaTestLab has a vast network of material testing laboratories, spread across the USA and Canada. We support your all material testing needs ranging from specific astm c1901 test to various testing techniques.
How much do I need to pay for the astm c1901 test?
Please contact us for a detailed quote for your astm c1901 testing needs. Cost incurred to carry out different astm c1901 testing methodology depends on the type of raw material; number of samples, coupons, or specimens; test conditions, turn around time etc. Costs of some ASTM testing methods start from $100 and the final value depends upon the factors listed above. Please contact us for the best and latest prices.
How many samples are required for astm c1901?
The required number of samples or specimens should comply with the procedure given in the astm c1901 standard. However, the MaTestLab operations team can assist you for your special requirements once you share your testing details with us.
How much discount can I get on the astm c1901 test?
MaTestLab has a vast testing laboratory network, hence we bring you the best testing facilities in a cost-effective way. We offer considerable discounts (15-20%) to our returning customers based on test volume and frequency.
How many days will it take to complete the astm c1901 test?
The turnaround time for astm c1901 test methodology depends upon the test procedure mentioned in the standard test document. However, we at MaTestLab understand your research requirements and hence try to get your test completed within the least possible time.
Where can I get the astm c1901 tested?
You can share your astm c1901 testing requirements with MaTestLab. MaTestLab has a vast network of material testing laboratories, spread across the USA and Canada. We support your all material testing needs ranging from specific astm c1901 test to various testing techniques.
MaTestLab Inc. offers accessible, quick, and affordable material testing, product testing, and failure analysis services. We support your on-demand testing and expert consultation needs with the help of our extensive network of material testing laboratories situated in the US and other parts of the world.
MATERIAL TESTING
We offer destructive and non-destructive tests over a range of mechanical, electrical, chemical, thermal, optical, corrosion, radiation, and biological testing methodologies defined by ASTM, ISO and other organizations.
PRODUCT TESTING
We help you evaluate and ensure your product quality and performance with standard and custom-made testing solutions. All the tests are done at well-equipped testing laboratories using standard testing methods for best output and satisfaction.
FAILURE ANALYSIS
Failure analysis ensures high levels of quality in every manufacturing process. We help you with getting the best failure or root cause analysis to determine the cause of the failure. The results help you identify means to prevent failure recurrences.
