Case Study: How Did We Perform Nickel Foil Testing Using ASTM E1019 and ICP-OES Analysis?

Case Study: How Did We Perform Nickel Foil Testing Using ASTM E1019 and ICP-OES Analysis?

What Is the ASTM E1019 Test? 

ASTM E1019 is the standard test method for the determination of Carbon, Sulfur, Nitrogen, and Oxygen in Steel, Iron, Nickel, and Cobalt Alloys by Various Combustion and Inert Gas Fusion techniques. The standard uses instrumental analytical techniques, including combustion analysis and inert gas fusion, to measure the concentrations of the specified elements.

What Was the Client Looking to Evaluate?

The client wanted to evaluate the carbon and sulfur content of nickel foil samples in accordance with ASTM E1019.

What Were the Testing Challenges and How Did We Solve It?

The client specified target detection limits of 0.001–0.005% for sulfur and 0.01–0.05% for carbon. The required detection range for carbon was achievable using LECO (Laboratory Equipment Company) combustion analysis; however, the required sensitivity for sulfur analysis could not be adequately achieved using the same technique. Therefore, we recommended Inductively Coupled Plasma (ICP-OES) analysis for sulfur, as an alternative analytical approach to meet the client’s requirements. Following the client’s confirmation, we proceeded with carbon analysis using LECO and sulfur analysis using the internal ICP method. The sample requirement was nickel foil measuring approximately 4 × 2 inches, with a sample mass of approximately 1 gram.

What Were the Analysis Results and Interpretation?

We analyzed the nickel foil samples using LECO for carbon and ICP-OES for sulfur, with both results falling below the specified target detection limits.

Discussion and Conclusions 

We successfully evaluated the carbon and sulfur content of the nickel foil samples using LECO combustion analysis and ICP analysis, respectively. By selecting suitable analytical techniques based on the required sensitivity, we achieved results below the specified target detection limits, meeting the client’s testing requirements.

Why Should You Choose Matestlab for ASTM E1019 Testing?

Matestlab provides ASTM E1019 testing services through expert laboratories based in the USA. Matestlab is your unified testing partner for physical, thermal, chemical, electrical, mechanical, environmental, and characterization testing needs, supported by our global network of 2200+ accredited testing laboratories. Our in-house materials science experts curate and design comprehensive testing programs tailored to your sample material and ASTM E1019 requirements, with regulatory requirements in mind. If you are looking for a managed and trusted testing partner to achieve your research goals, feel free to schedule a meeting with us or send us a request at connect@matestlabs.com to learn more about our services. The best way to get a quote quickly is to call us at (302)244-7710. We are happy to support you 

FAQs

What is the cost for the ASTM E1019 testing?

    Routine tests start at $300 per sample. However, customized solutions may be priced differently depending on your requirements.

    What is the typical turnaround time (TAT)?

      The typical turnaround time (TAT) is 10–12 days.

      What is the specimen/sample size requirement?

        The required sample size is 4 × 2 inches per sample.

        Which materials are covered under ASTM E1019?

          ASTM E1019 applies to the determination of carbon, sulfur, nitrogen, and oxygen in steel, iron, nickel alloys, and cobalt alloys within specified composition ranges.

          Does ASTM E1019 provide a pass/fail limit?

            No. ASTM E1019 does not itself provide pass/fail limits. ASTM E1019 explains how to measure the element content.

            Suyog Kamble
            Suyog Kamble is an Operations Associate at Matestlab Inc. Suyog holds a postgraduate degree in organic chemistry and is trained in material science topics.
            Know More
            Resources
            Recent blogs
            Testimonials
            Real results
            Engineers trust us with what matters most
            Why Choose Matestlab?
            Matestlab is a unified testing services partner based in the USA. Matestlab offers raw material and product testing services through accredited, expert laboratories primarily based in the USA. Matestlab supports physical, thermal, chemical, electrical, mechanical, environmental, and characterization testing needs through its global network of 2200+ accredited testing laboratories. Matestlab's in-house materials science experts curate and design comprehensive testing programs matched to the sample material and specific testing need, with regulatory requirements and confidentiality in mind.

            If you are looking for a managed and trusted testing partner to achieve your research goals, feel free to schedule a meeting with us or send us a request at connect@matestlabs.com to learn more about our services. For a quick quote, call us at (302)244-7710. We are happy to serve you.
            Start Your Testing
            Project Today
            Define your requirements and get access to
            specialized laboratories ready to deliver results
            Partners with us
            Clients
            Vendors
            Process for testing
            • STEP 01

              You share your testing requirements

            • STEP 02

              You share your sample(s)

            • STEP 03

              We deliver your test reports

            Get your testing done

            Let us know your testing requirements and we will be right back with a solution.

              Let us root for each other. Collaborate to grow, expand, and accelerate our businesses.

              Partner with us