ASTM E808 Practice for Describing Retroreflection

    What is ASTM E808?

    ASTM E808 is a standard practice for describing retroreflection using terminology, geometrical coordinate systems, and procedures for designating angles. It applies to measurements in which the incidence angle of the radiation on the sample and the viewing angle from the sample are less than about 10°, and the reflected radiation is directed opposite to the direction of the incident radiation. ASTM E808 (Standard Practice for Describing Retroreflection) serves as a basis for describing retroreflectors and specifying retroreflector performance and retroreflection measurements. Therefore, ASTM E808 helps engineers and technicians consistently describe the geometry and performance of retroreflective materials and devices.

    Read more

    Get Certified ASTM E808 Testing for Reliable Retroreflection Evaluation

    ASTM E808 evaluation is a standardized method for describing retroreflection under a defined geometrical condition. The practice introduces terms and coordinate systems to describe the relationships between the illumination, observation, and retroreflector axes. As a result, an engineer can then specify the retroreflective performance in a consistent angle designation and measurement terminology. When used with applicable measurement practices and test methods, the results can assist in evaluating retroreflective sheeting, pavement markings, signs, safety materials, and other retroreflective products.

    What is the Scope of the ASTM E808 Test Standard?

    ASTM E808 is a standard practice that establishes terminology, the alternative use of geometrical coordinate systems, and procedures for the designation of angles used in the description and measurement of retroreflectors. The scope of ASTM E808 includes:

    Read more

    • Terminology: Definitions of terms used to describe retroreflection and related measurements.
    • Coordinate systems: Alternative geometrical coordinate systems for visualizing relationships between the various angles used in retroreflection.
    • Angle designation: Procedures for designating the angles associated with illumination, observation, and retroreflector orientation.
    • Retroreflector description: Geometrical terminology for describing retroreflective materials and devices.
    • Performance specifications: Terminology and geometrical descriptions used when specifying retroreflector performance.
    • Retroreflection measurements: A common geometrical basis for measurements of retroreflection.
    • Measurement geometry: Application to measurements in which the angle at the sample between incident radiation and viewing direction is less than approximately 10°.
    • Reflected radiation: Retroreflection in which the reflected radiation is concentrated in a direction opposite to the direction of incidence.
    • Related standards: Terminology defined by ASTM E808 can be used in other ASTM documents concerning retroreflection.

    What are the Uses of ASTM E808 Testing?

    ASTM E808 provides the terminology of retroreflection and serves as a standard reference for defining the geometrical terminology of retroreflective measurements. Therefore, the results can be beneficial for engineers to interpret and report on retroreflective performance under specific measurement conditions. The ASTM E808 standard:

    • Specifies the geometry of the retroreflection measurements.
    • Defines the terms used when referring to retroreflectors.
    • Describes other coordinate systems of geometry.
    • Specifies how to designate angles used in retroreflection.
    • Endorses the standard for retroreflector performance.
    • Assists with explaining how illumination and viewing directions are related.
    • Assists in comparing retroreflection measurements made using equivalent geometrical conditions.
    • Assists with the description of retroreflective sheeting, pavement markings, signs, and other retroreflective materials and devices.
    • Common geometrical basis of retroreflection measurements for various applications.

    Which materials can be tested under ASTM E808?

    ASTM E808 is useful for measuring, describing, and characterizing retroreflective materials, surfaces, stripes, and devices that can be defined and measured in geometrical terms as defined by the practice. Any retroreflective product that contains retroreflective elements such as retroreflective sheeting, pavement markings, signs, and others can be evaluated if an applicable measurement procedure is applied. It primarily provides names and geometry descriptions for the specimens in practice, and there is no universal specimen shape or specimen dimension. Therefore, material condition, size, surface, and orientation should be suitable for the retroreflection measurement method to be used.

    Why is ASTM E808 Important?

    ASTM E808 is significant because, without consistent terminology and geometrical descriptions, an accurate way to communicate retroreflection measurements cannot be obtained. Retroreflectors reflect radiation with a preference back toward the direction of incidence, and thus the measured response will be geometry-dependent. The practice offers alternative coordinate systems and methods for marking out the designating angles. Therefore, the results can be interpreted in the same way by engineers when assessing retroreflective materials or when comparing measurements. The practice also serves as a common foundation for retroreflection measurements to be used around the world.

    ASTM E808 Equipment and Sample Preparation Guide

    The measurement setup must be such that the applicable geometry of the retroreflection and the angular relationships can be established accurately per ASTM E808. Equipment for the evaluation varies depending on the retroreflection measurement procedure employed with the practice.

    Read more

    Related standards for ASTM E808 include ASTM E809 for measuring photometric characteristics of retroreflectors, ASTM E810 for determining the coefficient of retroreflection of retroreflective sheeting, ASTM E1709 for portable measurement of the coefficient of retroreflected luminance, and ASTM E2177 for measuring the coefficient of retroreflected luminance of pavement markings.

    Sample and Specimen DetailsRetroreflective sheeting, pavement markings, signs, stripes, surface, or other retroreflective material or device appropriate to the measurement procedure being used.
    Specimen PreparationTechnicians prepare and position the specimen to accurately determine the reference direction, orientation, surface condition, and relevant axes for the chosen retroreflection geometry.
    Specimen DimensionsSince ASTM E808 does not define a single specimen dimension, it sets forth terminology and geometrical systems. The size of the specimen should then be appropriate for the retroreflection measurement procedure used.
    InstrumentationThe measurement system may consist of a suitable light source, a photometric receiver, positioning or goniometric apparatus, a sample holder, and apparatus for establishing and measuring the necessary illumination and observation geometry.

    Testing Procedures and Requirements for ASTM E808

    The geometrical framework utilized in the description of retroreflection measurements and in the relationships between the incident and viewing directions is described in ASTM E808. Therefore, the specimen orientation, coordinate systems, angle designation, and measurement geometry should be controlled during the evaluation. The procedure outlined in ASTM E808 is as follows-

    Read more

    Specimen PreparationThe technicians prepare and check the retroreflective specimen, and define its reference orientation and pertinent axes for the chosen measurement geometry.
    Coordinate System SelectionThe analysts choose the appropriate geometrical coordinate system to describe the relationships between the illumination, the observation, the retroreflector, and the reference directions.
    Angle EstablishmentTechnicians determine and specify the appropriate angle to describe the geometry of the retroreflection of the specimen.
    Specimen PositioningThe testing apparatus provides positioning of the specimen and measurement elements according to the selected geometry.
    Illumination and ObservationThe measurement system defines the incident and viewing directions needed for the relevant retroreflection measurement.
    Data CollectionThe relevant photometric response, applicable angles, specimen information, coordinate system, and measurement conditions are recorded by the analysts.
    Result ReportingThe engineer’s report contains the specimen information, the coordinate system, the angle designations relating to the geometry of the measurements, the photometric quantities measured, and other conditions that are required to interpret the results.

    ASTM E808 Testing Process and Data Collection

    ASTM E808 evaluation begins by choosing and preparing an adequate specimen of retroreflector for use in accordance with the appropriate measurement procedure. The specimen is then placed in a position to allow the appropriate retroreflector and reference axes to be set up. The geometry between the incident direction and viewing direction is defined with respect to the selected coordinate system. The appropriate angles are then marked and held in place while measuring. The testing system writes the corresponding photometric response for the selected geometry, and the specimen and measurement information are recorded. The data obtained describe the retroreflecting performance in the geometry specified and can be compared if the same geometry is used in the measurement.

     The image shows a retroreflective specimen positioned between an illumination source and viewing direction with the relevant retroreflection angles and coordinate axes identified.
    ASTM E808 Retroreflection Measurement Geometry

    Common Challenges and Troubleshooting

    Specimen orientation, presentation angle, coordinate system, and illumination and viewing geometry are all critical to accurate evaluation under ASTM E808. The setting up of necessary angles may be difficult, and variations in geometry may impact the measured retroreflective response. It is therefore important that technicians properly set up the appropriate reference axes and coordinate system prior to testing. A major problem is the variability in the positioning of specimens and how the illumination and viewing directions are related to each other as the specimen rotates. Therefore, it is essential that the technicians keep themselves in a stable position and give a clear indication of the applicable geometrical conditions during the evaluation.

    ASTM E808 Analysis Results and Interpretation

    The results of ASTM E808 are used to consistently describe retroreflection under specified geometrical conditions. Analysts calculate the appropriate retroreflection characteristics from the measured response, along with the angles and designated coordinate system. Data recorded can be used to describe and compare retroreflective materials and devices for equivalent measurement geometries. Therefore, these results can be applied to assist with material evaluation, product specifications, quality control, and performance comparisons.

    Read more

    • The measurement report includes the coordinate system and geometrical relationships applicable to describing the retroreflection.
    • The analyst enters the appropriate entrance, observation, or orientation angle, or other values applicable to the measurement.
    • The testing results may comprise any photometric quantities specified by the applicable retroreflection measurement procedure and may be expressed in the units specified by the applicable retroreflection measurement procedure.
    • Engineers compare results of retroreflection only when the measurement geometry, illumination, observation conditions, and photometric quantities are the same.
    • Analysts use the recorded geometrical and photometric information to support material evaluation, product specifications, quality control, and performance comparison.

    Link to ASTM E808

    FAQ

    Why is ASTM E808 important?
    The significance of ASTM E808 is that it establishes standard terminology and a standard set of geometrical systems to describe retroreflection and related measurements.
    ASTM E808 is used to describe retroreflectors, define measurement angles, define geometrical coordinate systems, and facilitate retroreflection performance measurement.
    ASTM E808 provides a description and measurement of retroreflection based on specified geometry, and specifies the particular photometric quantity and units in accordance with the measurement procedure involved.

    Updated on September 23, 2026

    Rohit Dhembare
    About Author
    Rohit Dhembare is an Operations Associate at Matestlab Inc., holds a postgraduate degree in Organic Chemistry and is trained in Materials Science testing techniques.
    Know More
    Testimonials
    Real results
    Engineers trust us with what matters most
    Why Choose Matestlab?
    Matestlab is a unified testing services partner based in the USA. Matestlab offers raw material and product testing services through accredited, expert laboratories primarily based in the USA. Matestlab supports physical, thermal, chemical, electrical, mechanical, environmental, and characterization testing needs through its global network of 2200+ accredited testing laboratories. Matestlab's in-house materials science experts curate and design comprehensive testing programs matched to the sample material and specific testing need, with regulatory requirements and confidentiality in mind.

    If you are looking for a managed and trusted testing partner to achieve your research goals, feel free to schedule a meeting with us or send us a request at connect@matestlabs.com to learn more about our services. For a quick quote, call us at (302)244-7710. We are happy to serve you.
    Start Your Testing
    Project Today
    Define your requirements and get access to
    specialized laboratories ready to deliver results
    Partners with us
    Clients
    Vendors
    Process for testing
    • STEP 01

      You share your testing requirements

    • STEP 02

      You share your sample(s)

    • STEP 03

      We deliver your test reports

    Get your testing done

    Let us know your testing requirements and we will be right back with a solution.

      Let us root for each other. Collaborate to grow, expand, and accelerate our businesses.

      Partner with us