ASTM E809 Practice for Measuring Photometric Characteristics of Retroreflectors

    What is ASTM E809?

    ASTM E809 is the standard practice for measuring the photometric characteristics of retroreflective materials and retroreflective devices. The practice provides general procedures for instrumentally measuring photometric quantities related to the visual perception of retroreflected light. ASTM E809 outlines the parameters to use when reporting photometric parameters in various retroreflector tests and specifications. ASTM E809 (Standard Practice for Measuring Photometric Characteristics of Retroreflectors) therefore provides a standard for engineers and technicians to assess retroreflector performance under specified measuring conditions, specifically related to the geometry of vehicle headlamps, retroreflectors, and human eyes during nighttime viewing.

    Read more

    Get Certified ASTM E809 Testing for Reliable Retroreflective Performance Evaluation

    ASTM E809 testing provides a standard method for measuring the photometric quantities of retroreflective materials and devices. It is based on photometric measurement principles that relate the measured response to the visual perception of retroreflective light. Therefore, engineers can make retroreflective performance assessments under specific geometric and spectral conditions. When suitable measurement geometry and test requirements have been established, the results can be used to evaluate retroreflective sheeting, pavement markings, signs, safety materials, and other retroreflective products.

    What is the Scope of the ASTM E809 Test Standard?

    ASTM E809 is a standard practice that outlines general procedures for instrumental measurement of the photometric characteristics of retroreflective materials and devices. The practice also outlines the parameters that must be specified when a specific retroreflector test and specification calls for a photometric measurement. The scope of ASTM E809 includes:

    Read more

    • Material type: Retroreflective materials and retroreflective devices suitable for instrumental photometric measurement.
    • Purpose: Measurement of photometric quantities associated with the visual perception of retroreflected light.
    • Measurement method: Instrumental measurement of the photometric characteristics of retroreflectors.
    • Photometric parameters: Quantities required to state and report photometric measurements for retroreflectors.
    • Nighttime application: Measurement conditions can relate to the geometry between a vehicle headlamp, a retroreflector, and the driver’s eye.
    • Light source: CIE Standard Source A is used to represent a tungsten vehicle headlamp where applicable.
    • Photometric response: The receptor uses photopic V(λ) spectral responsivity corresponding to the light-adapted human eye.
    • Geometry: The measurement geometry must be specified by the user for the particular application.
    • Geometrical terminology: Geometric terms used to describe retroreflection are addressed by ASTM E808 rather than ASTM E809.
    • Measurement units: SI units are regarded as standard, while values in parentheses are provided for information only.

    What are the Uses of ASTM E809 Testing?

    ASTM E809 testing is conducted to determine the photometric quantities that pertain to the visual response to the retroreflected light. Therefore, the results can be employed by engineers to gain insight into the nighttime performance of retroreflective materials and devices. The ASTM E809 standard:

    • Measures the photometric properties of retroreflectors and retroreflecting devices.
    • Supports evaluation of retroreflective performance under specified measurement conditions.
    • Supports the connection between the photometric measurement and the “seeing” of the retroreflected light.
    • Helps with the analysis of the relationship between the vehicle headlamps, retroreflectors, and the driver’s eye positions.
    • Assists in the determination of the photometric parameters used in certain retroreflector tests and specifications.
    • Provides support for the testing and evaluation of retroreflective sheeting, pavement markings, signage, and other safety products.
    • Offers measurement information for the photometric quantities in retroreflector specifications.
    • Assists in the comparison of retroreflective performance under equivalent measurement conditions.

    Which materials can be tested under ASTM E809?

    ASTM E809 can be used for retroreflective devices or retroreflective materials that can be evaluated by instrumental photometric measurements. Examples include retroreflective sheeting, pavement markings, signs, and other devices that reflect light back to the light source. ASTM E809 does not specify one specimen form and size due to the variety of products and the different measurement procedures. The preparation and mounting should then be arranged so that the desired photometric measurement can be carried out under the desired conditions.

    Why is ASTM E809 Important?

    ASTM E809 is important because photometric measurements give quantitative data for the visual properties of the retroreflected light. Retroreflective products are often assessed under nighttime viewing conditions, where the geometry of the vehicle headlamp, the retroreflector, and the driver’s eye plays a key role. This practice offers a complete approach to retroreflector photometry and specifies the parameters needed for reporting photometric measurements. Therefore, the findings can help engineers assess material performance and provide consistent measurement information for retroreflector specifications. The chosen geometry, light source, receptor response, specimen condition, and measurement equipment can also affect the measurement response.

    ASTM E809 Equipment and Sample Preparation Guide

    ASTM E809 requires equipment that can generate and measure the photometric conditions required to test the retroreflector. The measurement system shall include the appropriate light source, photometric receiver, positioning of the specimen, and measurement geometry for the chosen evaluation.

    Read more

    Related standards for ASTM E809 include ASTM E808 for describing retroreflection geometry and terminology, ASTM E810 for determining the coefficient of retroreflection of retroreflective sheeting, ASTM E1709 for portable measurement of the coefficient of retroreflected luminance, and ASTM E2177 for measuring the coefficient of retroreflected luminance of pavement markings.

    Sample and Specimen DetailsRetroreflective sheeting, pavement markings, signs, or other retroreflective materials and devices suitable for instrumental photometric measurement.
    Specimen PreparationTechnicians prepare and mount specimens so that the retroreflective surface is correctly positioned and representative of the material or device being evaluated.
    Specimen DimensionsASTM E809 does not require a unique specimen size since the size and type of specimen will vary depending on the type of device and measurement for a particular photometric measurement. The specimen must be of appropriate size and mounted for the measurement arrangement to be used.
    InstrumentationA proper light source, photometric receptor, specimen holder, positioning system, photometric and geometric measurement apparatus, and controls are used in the laboratory for the purpose of achieving the necessary photometric and geometric conditions.

    Testing Procedures and Requirements for ASTM E809

    ASTM E809 provides a means for the laboratory to measure the photometric quantities associated with retroreflective materials and devices under specified measurement conditions. Therefore, the conditions of specimen preparation, light source and receptor response, measurement geometry, and photometric measurement conditions must be controlled during the test. The procedure outlined in ASTM E809 is as follows-

    Read more

    Specimen PreparationThe technicians prepare and inspect the retroreflective specimen or device and place it correctly for the desired photometric measurement.
    Measurement ConfigurationTechnicians set the desired measurement geometry and arrange the light source, specimen, and photometric receptor, depending on the application.
    Light Source EstablishmentAnalysts determine the necessary source characteristics, as well as the corresponding representation of the CIE Standard Source A applicable for the photometric evaluation, if it is required.
    Photometric Receptor SetupThe testing system is based on a receptor having the correct photopic V(λ) spectral responsivity for the light-adapted human eye.
    Photometric MeasurementThe testing apparatus provides a measurement of the applicable photometric quantity of the retroreflective material or device in the specified environment.
    Data CollectionAnalysts record the measured photometric response together with the applicable geometry, specimen information, source conditions, receptor characteristics, and measurement conditions.
    Result ReportingThe engineer’s report includes specimen information, measurement geometry, photometric quantity, units, light source, receptor conditions, and other information required to interpret the results.

    ASTM E809 Testing Process and Data Collection

    ASTM E809 testing begins with selecting a retroreflective material or device appropriate for the desired photometric measurement and preparing it for testing. The specimen is then attached to the measurement system, and a certain relationship between the light source, the retroreflector, and the receptor is established. The appropriate source and receptor conditions are controlled so the measurement reflects the desired photometric response. Then the system to be tested measures the desired photometric value and stores the measurement conditions. The resulting data describe the photometric performance of that retroreflector under the particular test conditions selected; the same test geometry, source, receptor, and test conditions are used to compare the photometric performance of the retroreflector.

    The image shows a retroreflective specimen positioned between a light source and photometric receptor during ASTM E809 photometric measurement.
    ASTM E809 Photometric Measurement of Retroreflective Materials and Devices

    Common Challenges and Troubleshooting

    To obtain accurate ASTM E809 results, it is necessary to exercise careful control of the light source, the photometric receptor, the position of the specimen, the geometry of the measurement, and stray light. Ensuring steady measurement conditions can be difficult, and changes in the measured photometric characteristics may result from changes in the source or the receptor response. Hence, the measurement setup should be carefully arranged, and the performance of the instrumentation should be checked beforehand. Another important consideration is the positioning of the specimens, because variations in the orientation of the retroreflector can affect the response measured. Thus, it is crucial that the laboratory ensure the measurement conditions listed above are maintained and that the geometry employed during the test is recorded.

    ASTM E809 Analysis Results and Interpretation

    The results from ASTM E809 are used to provide information on the photometric characteristics of retroreflector materials and devices under specified measurement conditions. The photometric response of the retroreflector is determined by measuring the appropriate quantity with the chosen source, receptor, and geometry. When comparable conditions are employed, the data recorded enable engineers to compare the performance of various retroreflective materials and devices. Therefore, these results can be applied to material selection, product specifications, quality control, and evaluation of nighttime retroreflectivity.

    Read more

    • The laboratory records the applicable photometric quantity and measurement conditions to establish the retroreflective response.
    • The analyst compares the measured photometric response to the chosen measurement geometry and intended application.
    • The laboratory provides the photometric results in SI units, depending on the measured quantity and procedure.
    • Engineers compare photometric characteristics among retroreflective materials tested under equivalent source, receptor, geometry, and environmental conditions.
    • Analysts use the recorded results to support material evaluation, product specifications, quality control, and assessment of nighttime visibility.

    Link to ASTM E809

    FAQ

    Why is ASTM E809 important?
    ASTM E809 is significant because it offers fixed test methods for the photometric properties of retroreflector performance that are related to vision.
    Photometric Characteristics of retroreflective materials and devices—ASTM E809 is a standard used to measure the properties of retroreflective materials and devices under specific conditions.
    ASTM E809 specifies the photometric quantities related to retroreflected light, and the reporting units are dependent on the type of measurement procedure.

    Updated on September 23, 2026

    Suyog Kamble
    About Author
    Suyog Kamble is an Operations Associate at Matestlab Inc. Suyog holds a postgraduate degree in organic chemistry and is trained in material science topics.
    Know More
    Testimonials
    Real results
    Engineers trust us with what matters most
    Why Choose Matestlab?
    Matestlab is a unified testing services partner based in the USA. Matestlab offers raw material and product testing services through accredited, expert laboratories primarily based in the USA. Matestlab supports physical, thermal, chemical, electrical, mechanical, environmental, and characterization testing needs through its global network of 2200+ accredited testing laboratories. Matestlab's in-house materials science experts curate and design comprehensive testing programs matched to the sample material and specific testing need, with regulatory requirements and confidentiality in mind.

    If you are looking for a managed and trusted testing partner to achieve your research goals, feel free to schedule a meeting with us or send us a request at connect@matestlabs.com to learn more about our services. For a quick quote, call us at (302)244-7710. We are happy to serve you.
    Start Your Testing
    Project Today
    Define your requirements and get access to
    specialized laboratories ready to deliver results
    Partners with us
    Clients
    Vendors
    Process for testing
    • STEP 01

      You share your testing requirements

    • STEP 02

      You share your sample(s)

    • STEP 03

      We deliver your test reports

    Get your testing done

    Let us know your testing requirements and we will be right back with a solution.

      Let us root for each other. Collaborate to grow, expand, and accelerate our businesses.

      Partner with us