ASTM D609 Standard Practice for Preparation of Cold-Rolled Steel Panels for Testing Coating Products

    What is ASTM D609?

    ASTM D609 provides guidelines for making cold-rolled steel panels ready for testing paints, varnishes, lacquers, conversion coatings, and other coating products. When making the panels, keep variation to a minimum, especially the kind that comes from surface dirt or uneven cleaning, so that the base stays steady for coating tests. ASTM D609 (Standard Practice for Preparation of Cold-Rolled Steel Panels for Testing Paint, Varnish, Conversion Coatings, and Related Coating Products) consists of five ways to prepare. Procedure A, for Conversion Coatings. Procedure B, which is vapor degreasing. Procedure C, where you use solvent brushing. Procedure D, which uses solvent wiping. Procedure E, which is alkaline cleaning.

    Read more

    Get Certified ASTM D609 Testing

    ASTM D609 testing and panel preparation are useful for coating manufacturers, steel suppliers, paint formulators, engineers, technicians, and quality-control professionals who need reproducible steel surfaces for coating evaluation. Technicians prepare cold-rolled steel panels using the applicable ASTM D609 procedure and carefully control cleaning and treatment conditions. These prepared panels can then be used for further coating trials, where coating performance can be compared on identical substrates. Independent ASTM D609 preparation and evaluation can help with coating development, quality control, research, comparative testing, and product qualification.

    What is the scope of ASTM D609?

    ASTM D609 details how to prepare a wide range of types of cold-rolled steel panels for testing of paint, varnish, lacquer, conversion coatings, and related products. The goal is to obtain uniformity and repeatability to minimize the risk of obtaining different coating test results in subsequent tests caused by differences in the preparation of the panels. The scope of ASTM D609 covers:

    Read more

    • Material Type: Cold-rolled steel panels. 
    • Conversion-Coating Preparation: Procedure A covers conversion coatings such as phosphates and chromates. 
    • Vapor Degreasing: Procedure B removes contaminants using vapor-degreasing techniques. 
    • Solvent Brushing: Procedure C prepares panels using solvent and brushing. 
    • Solvent Wiping: Procedure D uses solvent wiping for surface cleaning. 
    • Alkaline Cleaning: Procedure E prepares panels using alkaline cleaning. 
    • Surface Uniformity: Preparation is intended to produce a uniform and reproducible surface for subsequent coating testing. 
    • SI Units: SI units are regarded as standard, while values in parentheses are provided for information. 

    What are the uses of ASTM D609?

    ASTM D609 is mainly designed to help standardize the preparation of steel test panels prior to testing coating products. It is essential to prepare the surface consistently since surface cleanliness or treatment differences will affect coating adhesion, corrosion resistance, appearance, and other properties. ASTM D609 thus provides technicians with a means to create similar starting surfaces for coating evaluations. Common uses include:

    • Paint Testing: Prepare steel panels prior to assessing the performance of paint. 
    • Evaluation of varnish and lacquer: Ensure uniform steel surfaces for varnish and lacquer testing. 
    • Conversion-Coating Evaluation: Make panels for evaluation of phosphate, chromate, and other conversion coatings. 
    • Coating Development: Conduct comparison tests among coating formulations under controlled conditions on the substrate. 
    • Adhesion Studies: Prepare surfaces that will adhere to a substrate for future adhesion testing. 
    • Corrosion Testing: Make uniform test panels for corrosion resistance testing. To minimize variation due to inconsistent substrate preparation, add quality control. 
    • Research and Development: Investigate the effect of coating formulations and surface treatment. 
    • Comparative Testing: Enable different coating products to be assessed with similar steel panels.

    Which Materials Can Be Tested According to ASTM D609?

    ASTM D609 is used for cold-rolled steel panels used for testing paints, varnishes, lacquers, conversion coatings, and other coating products. This practice does not apply to coated products but rather to steel test panels. The type of preparation procedure used depends on the kind of subsequent surface treatment or cleaning needed. The panels prepared can then be used in the applicable coating-performance testing.

    Why is ASTM D609 important?

    Coating-test results can be strongly influenced by the condition of the substrate before coating application. Oils, residues, oxidation, and inconsistent cleaning can change coating adhesion and other performance characteristics. ASTM D609 provides defined preparation procedures intended to produce uniform and reproducible cold-rolled steel surfaces. This improves the consistency of subsequent coating evaluations and helps analysts distinguish coating performance from variations caused by panel preparation. 

    ASTM D609 Equipment and Sample Preparation Guide

    Technicians select equipment based on the ASTM D609 preparation procedure being used. The practice does not establish one universal specimen geometry for every application; technicians select panel dimensions based on the subsequent coating test and project requirements.

    Read more

    Cold-Rolled Steel PanelsTechnicians provide the standardized substrate for coating and conversion-coating evaluation.
    Solvent Cleaning EquipmentTechnician supports solvent brushing, solvent wiping, or vapor-degreasing procedures.
    Rinsing and Drying EquipmentTechnician removes treatment residues and prepares the panel for subsequent coating application.
    Surface Inspection EquipmentThe technician examines panel cleanliness and surface condition.
    Dimensional Measuring EquipmentTechnician measures and records panel length, width, and thickness where required by the subsequent test.
    Specimen DimensionsASTM D609 focuses on the preparation of cold-rolled steel panels for testing coatings, specifying substrate thickness and surface properties rather than restricting the panels to a single mandatory length and width. 

    ASTM D609 Testing Procedures and Requirements

    ASTM D609 is a surface-preparation practice rather than a conventional property test. Technicians select the applicable preparation procedure, prepare the steel panel, inspect the resulting surface, and document the preparation before applying the coating or conducting the subsequent evaluation. The testing process includes the following steps.

    Read more

    Panel Identification and Initial InspectionTechnician identifies the cold-rolled steel panel and documents its initial surface condition.
    Surface Cleaning / TreatmentTechnician applies the selected ASTM D609 procedure to remove contaminants or modify the surface.
    Prepared Surface InspectionTechnician evaluates the cleaned or treated surface before coating application.
    Preparation DocumentationTechnician records the procedure, materials, process conditions, panel information, and resulting surface condition.

    ASTM D609 Testing Process and Data Collection

    Technicians choose the appropriate ASTM D609 procedure for coating evaluation and clean the panels with conversion coating, vapor degreasing, solvent brushing, solvent wiping, or alkaline cleaning. The technician monitors the specific cleaning and treatment parameters and avoids recontamination after preparation. After treatment, the technician inspects the panel surface and records the preparation procedure, panel identification, dimensions where applicable, cleaning materials, treatment conditions, and observations. The prepared panel is then used as the substrate for the applicable paint, varnish, lacquer, conversion coating, or related coating evaluation. The analyst reviews the preparation records and ensures that the panel preparation was consistent with the selected procedure. Analysts report subsequent coating-performance results under the applicable ASTM test method used to evaluate the coating.

     The image shows cold-rolled steel panels undergoing ASTM D609 surface preparation before coating evaluation.
    ASTM D609 cold-rolled steel panel preparation process 

    Common Challenges and Troubleshooting

    One of the common problems is the choice of an unsuitable preparation procedure for the coating to be evaluated. Residual oil, grease, cleaning chemicals, or other contaminants can compromise the prepared surface. Technicians should control cleaning materials and prevent contamination after preparation. Inconsistent treatment can also produce different surface conditions between panels and reduce the reproducibility of subsequent coating results. Panel handling is another important consideration. Touching prepared surfaces with contaminated gloves or tools can reintroduce contaminants. Technicians should handle prepared panels carefully and maintain consistent preparation, drying, storage, and coating-application conditions.

    Analysis Results and Interpretation

    The ASTM D609 evaluation provides information about the preparation of cold-rolled steel panels used for subsequent testing of paints, varnishes, conversion coatings, and related products. Analysts should document the panel information, selected preparation procedure, process conditions, and resulting surface condition for proper interpretation and comparison.

    Read more

    • ASTM D609 does not produce one universal numerical test result because it establishes surface-preparation procedures rather than measuring a single physical property. The resulting prepared panel serves as a controlled substrate for a separate coating-performance test.
    • The technician records panel identification, steel-panel dimensions in mm, preparation procedure, cleaning or treatment materials, relevant process conditions, drying or rinsing information, and surface observations.
    • The analyst documents the preparation procedure, surface condition, deviations, and any subsequent coating-test results obtained using the applicable ASTM method.
    • The report includes the identification of the panel, description of cold-rolled steel, dimensions, preparation procedure, cleaning/treatment, process conditions, surface observations, and applicable subsequent coating-test information.
    • The use of standardized panels, preparation, cleaning, treatment, handling, inspection, and documentation procedures ensures consistent, reliable, and comparable ASTM D609 preparation results by both technicians and coating analysts.

    Link to ASTM D609

    FAQ

    Does ASTM D609 test the coating itself?
    No. ASTM D609 prepares the steel substrate. The prepared panels are subsequently used for applicable coating-performance tests.
    The practice covers cold-rolled steel panels.
    The practice covers panel preparation procedures rather than establishing one universal panel geometry for every subsequent coating test. Panel dimensions should be appropriate for the intended evaluation.

    Updated on November 9, 2026

    Dr Ruchika Yogesh
    About Author
    Dr. Ruchika Yogesh is a serial entrepreneur, material science and AI/ML enthusiast, medicinal chemistry subject matter expert (SME), scientific/medical copyeditor, and a researcher.
    Know More
    Testimonials
    Real results
    Engineers trust us with what matters most
    Why Choose Matestlab?
    Matestlab is a unified testing services partner based in the USA. Matestlab offers raw material and product testing services through accredited, expert laboratories primarily based in the USA. Matestlab supports physical, thermal, chemical, electrical, mechanical, environmental, and characterization testing needs through its global network of 2200+ accredited testing laboratories. Matestlab's in-house materials science experts curate and design comprehensive testing programs matched to the sample material and specific testing need, with regulatory requirements and confidentiality in mind.

    If you are looking for a managed and trusted testing partner to achieve your research goals, feel free to schedule a meeting with us or send us a request at connect@matestlabs.com to learn more about our services. For a quick quote, call us at (302)244-7710. We are happy to serve you.
    Start Your Testing
    Project Today
    Define your requirements and get access to
    specialized laboratories ready to deliver results
    Partners with us
    Clients
    Vendors
    Process for testing
    • STEP 01

      You share your testing requirements

    • STEP 02

      You share your sample(s)

    • STEP 03

      We deliver your test reports

    Get your testing done

    Let us know your testing requirements and we will be right back with a solution.

      Let us root for each other. Collaborate to grow, expand, and accelerate our businesses.

      Partner with us