Introduction to ASTM D5118
Corrugated and solid fiberboard boxes, sleeves, and liners are utilized to unite products into packages of a size and shape appropriate for manual or mechanical handling and safeguard the contents from handling, shipping, and storage conditions. ASTM D5118 covers some of the basic styles and configurations of commercially available fiberboard packaging, which is used to unite and protect contents. MaTestLab is one of the best testing service providers, with the best network of testing laboratories in the USA to carry out ASTM D5118 tests for our clients.
ASTM D5118 Test Method
| Use of Adhesives | The Federal Food, Drug, and Cosmetic Act and the regulations issued thereunder must be followed by the glue used when food is packaged or packed in boxes,, and the adhesive may come into contact with or be near the food. For joints weighing less than 65 pounds, hot melt adhesives can be utilized to construct a 1 1/4-inch joint made entirely of thermal plastic components. These adhesives maintain their bond at temperatures between -20°F and +165°F. |
| Use of Joint Tape | A water-resistant compound is mixed with two thicknesses of sulfate paper, with a total basis weight of no less than 80 lb [130 g/m2]. The paper is reinforced with double-stranded nylon fiber of no less than 210 denier, which forms a pattern with strands spaced no more than 1⁄2 in. [13 mm] apart. |
ASTM D5118 Test Specimens
| Specimen Detail | Making new fiberboard liners, sleeves, and boxes is covered by ASTM D5118 |
| Specimen Size | Boxes should weigh below 65 lbs. |
ASTM D5118 Test Result
To sum up, this standard practice describes how to make shipping boxes out of fiberboard. Comprehensive recommendations about fabrication procedures, materials, and quality control measures guarantee the development of robust and dependable shipping boxes appropriate for the transportation of diverse items.
ASTM D5118 Related Tests
ASTM D5118 is related to tests including ASTM D685 for paper conditioning, ASTM D1974 for fiberboard box sealing and closing, and ASTM D2658 for calculating the interior dimensions of fiberboard boxes.
