ASTM C1834 Test for Slow Crack Growth Parameters of Advanced Ceramics by Constant Stress Flexural Testing at Elevated Temperatures 

ASTM C1834 is a standard test method for determining slow crack growth parameters of advanced ceramics using constant stress flexural testing (stress rupture) at elevated temperatures. The life of many ceramic components is limited by the subcritical growth of cracks. ASTM C1834 is used to determine the relative slow crack growth susceptibility of ceramic materials under specified environments at elevated temperatures. In addition, this method is used to determine the effects of processing variables and composition on slow crack growth as well as on the strength of materials. The information obtained from this test method is used for material development, quality control, characterization, design code or model verification, and limited design data generation purposes.

Read more

The types and dimensions of rectangular beam specimens as described in test method C1161 should be used in this ASTM C1834 test method. 

The ASTM C1834 test is conducted under a predetermined test environment at elevated temperatures. A four-point flexure test is used in this standard. In this method, a sample is placed on two supporting structures, and the force is applied to the specimen from above through two loading pins. These two loading pins are lowered from above at a constant rate until sample failure. Each test specimen is carefully placed into the test fixture to avoid damage and contamination and to ensure alignment of the specimen with the fixture. The test fixture/specimen assembly is then mounted into the test machine. The data acquisition is initiated. The force is applied to the test specimen. Time-measuring devices record the time to failure. If failure does not occur within the specific time agreed upon in the test program, it is recorded as a run-out. A force versus time curve is recorded for each test to check the requirement of force variation of testing machines. Fragments are collected. They are cleaned and stored in a protective container for further analysis, including fractography. Fractographic analysis of fractured test specimens is employed in ASTM C1834 testing to ensure that all the fracture origins are from the same population and to characterize the types, locations, and sizes of fracture origins as well as the flaw extensions due to slow crack growth. 

• In ASTM C1834, the flexural strength is calculated according to the formula for the strength of a beam in four-point 1⁄4 point flexure.
• Time to failure of flexure test specimens is determined as a function of constant applied stress in a given environment at ambient temperature.
• The fatigue curve and the slow crack growth parameters n and D are determined.
• The life of many ceramic components is limited by the subcritical growth of cracks. ASTM C1834 is used to determine the relative slow crack growth susceptibility of ceramic materials under specified environments at elevated temperatures.