ASTM E507 is a standard test method for the determination of aluminum in iron ores, concentrates, and agglomerates using Flame Atomic Absorption Spectrometry (F-AAS). Aluminum is determined in such materials in a mass fraction (%) range from 0.1 to 5. The values are stated in SI units as they are considered standard units.
ASTM E507 Standard Test Method for Determination of Aluminum in Iron Ores by Flame Atomic Absorption Spectrometry
What is ASTM E507?
What is the Scope of ASTM E507?
ASTM E507 is used to determine aluminum content in iron ores using the F-AAS technique. It is considered a reference method for compliance with compositional specifications for impurity content.
- Target Material: Iron ores, concentrates, and agglomerates.
- Target Element: Aluminum (Al).
- Concentration Range: Mass fraction from 0.1% to 5%.
- Technique Used: Flame atomic absorption spectrometry (F-AAS).
- Purpose of the test: Acts as a referee method for compliance with compositional specifications regarding impurity content.
- Safety and Units: Uses standard SI units and requires users to establish appropriate health, safety, and environmental practices.
ASTM E507 Testing Procedure and Requirements
The analytical sample shall be pulverized to pass a 150-μm sieve. The sample is first mixed in HCl and HNO3. Then it is evaporated and dehydrated so that any residue can be easily filtered, and then it is added into the main solution. The main solution is aspirated by the flame of a nitrous oxide-acetylene burner. The absorbed energy at the resonance line of the spectrum of aluminum is measured by atomic absorption spectrometry and compared with that of the calibration solutions.
ASTM E507 Result Analysis and Interpretation
The test results report aluminum in iron ores, concentrates, and agglomerates in the mass fraction (%) range from 0.1 to 5.
FAQ
Where can I get the astm e507 tested?
You can share your astm e507 testing requirements with MaTestLab. MaTestLab has a vast network of material testing laboratories, spread across the USA and Canada. We support your all material testing needs ranging from specific astm e507 test to various testing techniques.
How much do I need to pay for the astm e507 test?
Please contact us for a detailed quote for your astm e507 testing needs. Cost incurred to carry out different astm e507 testing methodology depends on the type of raw material; number of samples, coupons, or specimens; test conditions, turn around time etc. Costs of some ASTM testing methods start from $100 and the final value depends upon the factors listed above. Please contact us for the best and latest prices.
How many samples are required for astm e507?
The required number of samples or specimens should comply with the procedure given in the astm e507 standard. However, the MaTestLab operations team can assist you for your special requirements once you share your testing details with us.
How much discount can I get on the astm e507 test?
MaTestLab has a vast testing laboratory network, hence we bring you the best testing facilities in a cost-effective way. We offer considerable discounts (15-20%) to our returning customers based on test volume and frequency.
How many days will it take to complete the astm e507 test?
The turnaround time for astm e507 test methodology depends upon the test procedure mentioned in the standard test document. However, we at MaTestLab understand your research requirements and hence try to get your test completed within the least possible time.
Testimonials
Real results
Engineers trust us with what matters most
“We had a great experience working with this company for our ASTM E84 testing. They were the first company to respond to our inquiry within just a few minutes of submitting it. From start to finish, the communication was excellent, and the entire process was swift, straightforward, and hassle-free.”
“Very good communication, testing associates were very patient with delays on our end. Reasonable turnaround time for results and nicely detailed report. Analysts were also quick to answer any follow-up questions. Happy with results.”
“Matestlab connected us with an accredited lab within days, cutting weeks off our product validation timeline.”
Start Your Testing
Project Today
Project Today
Define your requirements and get access to
specialized laboratories ready to deliver results
specialized laboratories ready to deliver results
Start Testing
Partners with us
Clients
Vendors