ASTM D7949 Standard Test Methods for Thermal Integrity Profiling of Concrete Deep Foundations

    What is ASTM D7949?

    ASTM D7949 is a standard test method that provides procedures for determining the temperature profile in deep foundation elements formed from cast-in-place concrete, including bored piles, drilled shafts, augered piles, diaphragm walls, and barrettes. The thermal profile created during concrete curing indicates the uniformity and integrity of the concrete mass inside the deep foundation element. As concrete forms, it releases heat, and a temperature drop in part of the shaft may indicate a reduced cross section or poor-quality concrete. There are three alternative procedures in ASTM D7949 (Standard Test Methods for Integrity Testing of Concrete Deep Foundations by Thermal Methods).

    Read more

    Get Certified ASTM D7949 Testing for Reliable Deep Foundation Integrity Assessment

    Certification ensures that concrete deep foundation elements meet ASTM D7949 integrity requirements before loads are applied. ASTM D7949 certified testing delivers reliable, repeatable thermal profile data when you need construction verification or defect detection. Testing and certification confirm compliance with ASTM D7949 procedures and give contractors a quick quality assessment within 12–14 hours of casting, helping prevent costly remediation.

    What is the Scope of ASTM D7949?

    ASTM D7949 is a standard test method for determining the temperature of deep foundation elements built with cast-in-place concrete. The standard applies to bored piles, drilled shafts, augered piles, diaphragm walls, barrettes, and other elements. The lab measures temperature distribution using thermal probes, embedded sensors, or fiber optic cables.

    Read more

    The scope of ASTM D7949 includes:

    • Material type: ASTM D7949 applies to cast-in-place concrete deep foundation elements, such as bored piles, drilled shafts, augered piles, diaphragm walls, and barrettes. 
    • Purpose: ASTM D7949 is used to determine temperature profiles to evaluate the homogeneity and integrity of deep foundation elements of concrete.
    • Property measured: The test measures the temperature distribution of the concrete mass in early curing, which may reveal anomalies 
    • Method: ASTM D7949 describes three methods: Method A lowers a thermal probe into access ducts; Method B embeds thermal sensors into the reinforcing cage; Method C uses embedded fiber optic cables. 
    • Result: The testing laboratory gets temperature profile data, which shows the presence of anomalies and the location of the reinforcing cage in the center of the curing concrete. 
    • Test Limitations: The test only detects the presence of an anomaly and not the actual cause. The method is only used to test the concrete during its early curing stage until the peak temperature.
    • Environmental conditions: The test is performed under environmental conditions, which are concrete curing conditions, usually performed within 12-14 hours after casting. 
    • Applications: ASTM D7949 is used in the quality assurance of drilled shafts, bored piles, and diaphragm walls in transportation, building, and infrastructure projects. 

    What are the Uses of ASTM D7949 Testing?

    ASTM D7949 testing helps engineers and contractors determine the integrity of deep foundations before construction begins. The results allow quick detection of possible faults.

    This standard supports-

    • Testing the entire cross-sectional area of concrete-drilled shafts to ensure the quality of the concrete.
    • Detecting variations such as inclusions, bulges, honeycombing, or lack of cement particles
    • Checking the location of reinforcing cages in comparison to the center of the curing concrete
    • Avoid delays in construction due to lack of early test results within 12-14 hours after casting.
    • Prevention of future remedial works of failed foundations.
    • Assisting departments of transportation and project specifications with quality control. 

    Which materials can be tested under ASTM D7949?

    ASTM D7949 applies to cast-in-place concrete deep foundation elements. They are bored piles, drilled shafts, augered piles, diaphragm walls, barrettes, and others. This method is used for elements in which access ducts, embedded thermal sensors, or fiber optic cables are set during construction.

    Why is ASTM D7949 Important?

    ASTM D7949 is a standardized procedure for evaluating concrete integrity in deep foundation construction. Failure of a foundation may result from defects in the drilled shaft, either before or after installation of the reinforcing cage. The thermal integrity profiling method is used to assess the whole cross-section of the element and not a limited area. Construction is accelerated because the test is done earlier than other nondestructive tests, usually 12-14 hours after casting. Ensuring integrity in the construction process eliminates the need for remediation due to poor foundations. The method is used to identify major defects anywhere in the cross-section, which is very important for quality assurance of deep foundation elements. 

    ASTM D7949 Equipment and Sample Preparation Guide

    ASTM D7949 stipulates that thermal probes or embedded sensors, or fiber optic cables, be placed in the deep foundation element. Technicians measure temperature while the concrete cures and prepare instrumentation during construction.

    Read more

    Sample and Specimen Details
    Technicians install access ducts, embedded thermal sensors, or fiber optic cables within the deep foundation element during construction. 
    Specimen PreparationTechnicians attach thermal sensors or fiber optic cables to the reinforcing cage in vertical arrays, situated symmetrically around the diameter of the shaft. 
    Specimen DimensionsTechnicians distribute sensors or cables along the full length of the deep foundation element; access ducts typically measure 25 mm to 50 mm in diameter and extend from the top to the bottom of the element for thermal probe insertion, with sensors spaced at 300 mm to 600 mm intervals along the vertical arrays. 
    InstrumentationThe test uses thermal probes, embedded thermal sensors, fiber optic cables, data recording apparatus, and temperature measurement devices. 

    Testing Procedures and Requirements for ASTM D7949

    ASTM D7949 is a thermal method for measuring temperature profiles within CDEs as they cure. The test is performed in SI units. The process consists of the following stages

    Read more

    Instrumentation Installation Technicians install access ducts, embedded thermal sensors, or fiber optic cables attached to the reinforcing cage during construction  
    Data Recording Start Technicians start recording temperature data to the nearest 0.1 °C before concrete placement  
    Temperature Monitoring Technicians record temperatures periodically at intervals not exceeding 15 minutes during concrete curing  
    Peak Temperature Detection Technicians continue monitoring until a minimum of 12 hours has elapsed after the peak temperature of the concrete has been reached  
    Data Analysis Engineers evaluate temperature profiles to identify relative temperature reductions indicating potential anomalies  

    ASTM D7949 Testing Process and Data Collection

    The testing process starts with installation of access ducts, embedded thermal sensors, or fiber optic cables in the deep foundation element during construction. Analysts record temperature data before and after concrete placement, and then every 15 minutes or less. The temperature profile develops during concrete curing as it releases heat of hydration. Engineers look at the temperature data to discern relative temperature reductions that provide evidence of cross-section reduction or poor-quality concrete. Testing is continued after the highest temperature is reached for a minimum of 12 hours. The data acquisition system records all temperature measurements for analysis and reporting.

    The image shows thermal integrity profiling equipment with embedded sensors and data recorders for testing concrete deep foundations per ASTM D7949.
    ASTM D7949 Thermal Integrity Profiling of Concrete Deep Foundations

    Common Challenges and Troubleshooting in ASTM D7949

    Achieving accurate ASTM D7949 results requires proper installation of access ducts, thermal sensors, or fiber optic cables. If an anomaly is detected, the method simply identifies the presence of an anomaly but does not specify the exact cause of the anomaly, such as inclusion, bulge, honeycombing, or insufficient cement particles. Any interpretation is a qualitative one, based upon engineering judgment and experience. The method is only to be used on concrete at a young age during the early curing period up to and at peak temperature. Anomalies found may require additional coring or other tests to evaluate. 

    ASTM D7949 Analysis Results and Interpretation

    ASTM D7949 results provide temperature profile data that indicate the integrity of the concrete deep foundation elements. The test is a qualitative measure of the homogeneity of concrete.

    Read more

    • The laboratory collects temperature data at a rate of no more than 15 minutes during curing.
    • The engineer inspects the temperature profiles to assess relative temperature reductions in the structure and determine whether the reduction is due to cross-section loss and/or poor-quality concrete.
    • The report indicates the homogeneity and integrity of concrete both inside and outside the reinforcing cage.
    • The data confirms the reinforcing cage’s position relative to the center of the curing concrete.
    • The report detects anomalies such as inclusions, bulges, honeycombing, or absence of cement particles.
    • The result is used in accordance with ASTM D7949 to make quality assurance decisions in construction projects for deep foundation elements. 

    Link to ASTM D7949

    FAQ

    What materials can be tested under ASTM D7949?
    ASTM D7949 covers cast-in-place concrete deep foundation elements such as bored piles, drilled shafts, augered piles, diaphragm walls, and barrettes.
    The thermal probes and embedded thermal sensors included with ASTM D7949 are also used, along with data-recording apparatus, fiber-optic cables, and temperature-measurement devices.
    Method A is based on lowering a thermal probe into access ducts. In Method B, many embedded thermal sensors are attached to the reinforcing cage. During the implementation of the project, Method C uses embedded fiber optic cables for the reinforcing cage.
    ASTM D7949 is an anomaly detection method that relies on temperature reduction when curing concrete. A relative temperature reduction in a portion of the shaft may suggest that the cement content in that portion is decreased as a result of a reduction in cross-section or poor-quality concrete.

    Updated on October 13, 2026

    Zunaira Tehseen
    About Author
    Zunaira Tehseen is a scientific content specialist who bridges interdisciplinary research across biochemistry, molecular genetics, and materials science with technical content management. Leveraging expertise in bio-interface characterization, advanced materials evaluation, and AI-driven workflows, she curates, structures, and communicates complex technical data. At Matestlab, she leads content strategy and documentation for metallographic testing, mechanical characterization, and compliance with international standards such as ASTM and ISO, delivering precise, high-impact technical assets for industrial and scientific audiences.
    Know More
    Testimonials
    Real results
    Engineers trust us with what matters most
    Why Choose Matestlab?
    Matestlab is a unified testing services partner based in the USA. Matestlab offers raw material and product testing services through accredited, expert laboratories primarily based in the USA. Matestlab supports physical, thermal, chemical, electrical, mechanical, environmental, and characterization testing needs through its global network of 2200+ accredited testing laboratories. Matestlab's in-house materials science experts curate and design comprehensive testing programs matched to the sample material and specific testing need, with regulatory requirements and confidentiality in mind.

    If you are looking for a managed and trusted testing partner to achieve your research goals, feel free to schedule a meeting with us or send us a request at connect@matestlabs.com to learn more about our services. For a quick quote, call us at (302)244-7710. We are happy to serve you.
    Start Your Testing
    Project Today
    Define your requirements and get access to
    specialized laboratories ready to deliver results
    Partners with us
    Clients
    Vendors
    Process for testing
    • STEP 01

      You share your testing requirements

    • STEP 02

      You share your sample(s)

    • STEP 03

      We deliver your test reports

    Get your testing done

    Let us know your testing requirements and we will be right back with a solution.

      Let us root for each other. Collaborate to grow, expand, and accelerate our businesses.

      Partner with us