ASTM D6184 Standard Test Method for Oil Separation from Lubricating Grease
ASTM D6184 is a standard test method used to assess oil separation from lubricating grease at high temperatures through a conical sieve method. Oil separation from grease alters its consistency, potentially affecting its functionality. ASTM D6184t results aim to correlate with oil separation in 35-pound grease pails during storage. ASTM D6184 quantifies specimen performance in SI units and is employed for specifications and quality control.
Read More
GET STARTED
ASTM D6184 Introduction
ASTM D6184 evaluates the propensity of lubricating grease to separate oil when exposed to elevated temperatures. MaTestLab is one of the best testing service providers, with the best network of testing laboratories in the USA to carry out ASTM D6184 tests for our clients. It is typically conducted at 100°C for 30 hours, although the grease standards may specify different conditions. Greases with a worked penetration greater than 220 mm ⁄10 can undergo this test.
ASTM D6184 Test Method
Heating the Sample
The procedure involves placing the measured sample in a cone-shaped wire cloth filter and then suspending it in a beaker. The setup is heated under static conditions for the duration and temperature recommended by ASTM D6184. Unless specified otherwise in the grease specification, the sample is typically subjected to standard conditions of 100 ± 0.5°C for 30 ± 0.25 hours.
Weighing the oil
Subsequently, the separated oil is carefully weighed and expressed as a percentage of the test sample’s original mass.
D6184 Equipment and Sample Preparation
Specimen Detail
The conical sieve method is utilized to measure leakage from lubricating grease.
Specimen Size
In the ASTM D6184 test method, lubricating grease serves as the test specimen. It is examined for any indications of non-homogeneity, such as oil separation, phase shifts, or gross contamination. A fresh sample is obtained for testing to see if any abnormal conditions are detected.
D6184 Test Result and Interpretation
The ASTM D6184 test method, a standard procedure, evaluates the tendency of lubricating grease to separate oil when subjected to elevated temperatures. By employing the conical sieve method, this test assesses the extent of oil separation, which can impact the grease’s performance and consistency. These results help ensure product quality, guide specifications, and inform quality control measures in industries reliant on effective lubrication systems.
Service Name
Remarks
ASTM D6184 Testing
Contact US
Tests Related to ASTM D6184
ASTMD6184 is related to tests, including ASTM D217 for cone penetration of lubricating grease, ASTM D1742 for oil separation from lubricating grease, and ASTM E437 for industrial wire-cloth and screen specifications.
Use of D6184 in Various Industries
It is important in the automotive, aerospace, and manufacturing industries for maintaining the consistency and performance of lubricating greases. It prevents excessive oil separation and ensures that grease can withstand extreme conditions.
Materials Commonly Tested with D6184
Standard is usually used for lubricating greases that are used in high-performance machinery and cars. Lubricating greases in such vehicles and machinery are tested for their resistance to oil separation, which is essential for performance and longevity, and they are formulated with various base oils.
Importance of D6184
The standard is an essential technique for quality control and new product formulation in lubricating grease-oriented industries. It measures oil separation, ensures performance specifications, and evaluates the lifespan as well as reliability of grease, which ensures a reduction of machinery failure risks because of lubrication breakdown.
Related
FAQ's
Where can I get the astm d6184 tested?
You can share your astm d6184 testing requirements with MaTestLab. MaTestLab has a vast network of material testing laboratories, spread across the USA and Canada. We support your all material testing needs ranging from specific astm d6184 test to various testing techniques.
How much do I need to pay for the astm d6184 test?
Please contact us for a detailed quote for your astm d6184 testing needs. Cost incurred to carry out different astm d6184 testing methodology depends on the type of raw material; number of samples, coupons, or specimens; test conditions, turn around time etc. Costs of some ASTM testing methods start from $100 and the final value depends upon the factors listed above. Please contact us for the best and latest prices.
How many samples are required for astm d6184?
The required number of samples or specimens should comply with the procedure given in the astm d6184 standard. However, the MaTestLab operations team can assist you for your special requirements once you share your testing details with us.
How much discount can I get on the astm d6184 test?
MaTestLab has a vast testing laboratory network, hence we bring you the best testing facilities in a cost-effective way. We offer considerable discounts (15-20%) to our returning customers based on test volume and frequency.
How many days will it take to complete the astm d6184 test?
The turnaround time for astm d6184 test methodology depends upon the test procedure mentioned in the standard test document. However, we at MaTestLab understand your research requirements and hence try to get your test completed within the least possible time.
Where can I get the astm d6184 tested?
You can share your astm d6184 testing requirements with MaTestLab. MaTestLab has a vast network of material testing laboratories, spread across the USA and Canada. We support your all material testing needs ranging from specific astm d6184 test to various testing techniques.
MaTestLab Inc. offers accessible, quick, and affordable material testing, product testing, and failure analysis services. We support your on-demand testing and expert consultation needs with the help of our extensive network of material testing laboratories situated in the US and other parts of the world.
MATERIAL TESTING
We offer destructive and non-destructive tests over a range of mechanical, electrical, chemical, thermal, optical, corrosion, radiation, and biological testing methodologies defined by ASTM, ISO and other organizations.
PRODUCT TESTING
We help you evaluate and ensure your product quality and performance with standard and custom-made testing solutions. All the tests are done at well-equipped testing laboratories using standard testing methods for best output and satisfaction.
FAILURE ANALYSIS
Failure analysis ensures high levels of quality in every manufacturing process. We help you with getting the best failure or root cause analysis to determine the cause of the failure. The results help you identify means to prevent failure recurrences.
