Introduction to ASTM A659
Hot-rolled carbon steel sheets and strips are one of the most vibrant materials exploited in numerous areas. MaTestLab is one of the best testing service providers, with the best network of testing laboratories in the USA to carry out ASTM A659 tests for our clients. This specification applies to goods with a maximum Mn content of 0.90 % and a chemical composition within the defined range of 0.15 to 0.25 %. Critically, these necessities are essential to discovering whether the material is appropriate for pressure container applications, where physical integrity is of the utmost importance.
ASTM A659 Test Method
| Strip cutting | The specimen is welded to bring it into the form of cut strips |
| Oiling | While hot-rolled pickled (or blast-cleaned) material is typically given oiled, hot-rolled, non-pickled material is typically furnished, not oiled. It is possible to specify that pickled (or blast-cleaned) material should be furnished, not oiled, and that non-pickled material should be furnished oiled as necessary. |
ASTM A659 Test Specimens
| Specimen Detail | The material is used in its rolled state and is not annealed or pickled unless otherwise noted. |
| Specimen Size | A report with the notation “<0.02 %” may be issued if the concentration of copper, nickel, chromium, or molybdenum is less than 0.02 percent. The analysis may be reported as “<0.008%” if the amount of vanadium or columbium is less than 0.008%. |
ASTM A659 Test Result
ASTM A659 outlines the specifications for commercial steel (CS) sheets and strips. It focuses on hot-rolled types that have a carbon content between 0.16 and 0.25 percent. This specification guarantees uniformity, excellence, and compatibility for a range of industrial applications by offering comprehensive guidance for manufacturing procedures and material properties.
ASTM A659 Related Tests
ASTM A659 is related to tests, including ASTM A568 for hot-rolled steel and sheets and ASTM A635 for low-alloy sheets and strips.
